topic Communication issue between PRS 650 and Calibre in eReaders

Communication issue between PRS 650 and Calibre

schneidermic — Wed, 03 Nov 2010 21:01:11 GMT

Hi,

since a short week a 650 is mine.

As Reader Library does not fit my requirements, e.g conversion from PDF to epub, I looked for an alternative. I tried Calibre. But it seams, there is an communication issue between 650 and Calibre, I found some posts in Calibre bug report. Calibre says it is an hardware task an the user should ask Sony.

Has anyone an idea?

Please find attached the error message below the german posting.

Thanks in advance

Michael

--------

Hallo zusammen,

seit einer knappen Woche habe ich einen ebookreder PRS 650.

Da die Reder Library nicht alles das bietet, was ich mir wünsche (Stichwort: Konvertierung), habe ich Calibre ausprobiert. Leider wird der Reader zwar erkannt, es werden aber keine ebook übertragen. Die Fehlermeldung kommt bereits bei Erstellen der Bücherliste. Ein ähnliches Problem habe ich auf der Calibre bug-Seite bereitsgefunden, da wird jedooch ein Hardwareproblem dafür verantwortlich gemacht: Kontaktiere Sony.

Hier der Fehlercode, den Calibre auswirft.

Kann hier jemand damit etwas anfangen?

Fragende Grüße

Michael

-------

Fehler bei der Kommunikation mit dem Gerät

All strings must be XML compatible: Unicode or ASCII, no NULL bytes

Traceback (most recent call last):

File "site-packages\calibre\gui2\device.py", line 69, in run

File "site-packages\calibre\gui2\device.py", line 311, in _books

File "site-packages\calibre\devices\prs505\driver.py", line 139, in books

File "site-packages\calibre\devices\usbms\driver.py", line 164, in books

File "site-packages\calibre\devices\prs505\driver.py", line 164, in sync_booklists

File "site-packages\calibre\devices\prs505\sony_cache.py", line 417, in update

File "site-packages\calibre\devices\prs505\sony_cache.py", line 644, in update_text_record

File "lxml.etree.pyx", line 634, in lxml.etree._Element.set (src/lxml/lxml.etree.c:31548)

File "apihelpers.pxi", line 487, in lxml.etree._setAttributeValue (src/lxml/lxml.etree.c:13896)

File "apihelpers.pxi", line 1242, in lxml.etree._utf8 (src/lxml/lxml.etree.c:19848)

ValueError: All strings must be XML compatible: Unicode or ASCII, no NULL bytes

Communication issue between PRS 650 and Calibre

giprosp — Wed, 10 Nov 2010 11:49:58 GMT

Welche Version von Calibre hast Du denn? Die neueste Version (0.7.27), die gerade mal ein paar Tage alt ist, unterstützt den 650. Bei mir funktioniert alles einwandfrei mit Calibre (installiert unter Linux).

Tut mir leid, dass ich Dir nichts zu der Fehlermeldung selbst sagen kann.

Communication issue between PRS 650 and Calibre

-frank- — Thu, 11 Nov 2010 09:50:00 GMT

Hi giprosp and schneidermic,

Welcome to the forum!

This is an English language forum though, so could you please post questions and answers in English?

Posts in other languages are normally removed.

Thanks a lot!

Communication issue between PRS 650 and Calibre

schneidermic — Fri, 12 Nov 2010 15:24:54 GMT

Hi Giprosp,

I'm using Calibre 0.7.27, but with Windows XP Prof.

There is the 650 not specified, just the older ones and a general profile called "Sony Reader".

Since yesterday I have an additional issue, the content of the reader isn't shown in the windows of Main Storage and the inserted SD-Card.

Any sugestions?

Kind regards,

Michael

Communication issue between PRS 650 and Calibre

schneidermic — Sat, 13 Nov 2010 09:58:00 GMT

Hi Frank,

sorry for that.

Unfortunately there is no reader-forum at Sony available in German language. Thats why I posted in both.

Do you know if there is chance to have one. That might be easier for people using a sony reader in Germany.

Kind regards

Michael

Communication issue between PRS 650 and Calibre

tweety2b — Wed, 17 Nov 2010 13:32:10 GMT

Hi Michael,

Just some information on the roll-out of the Forum.

As you correctly point out, we are not fully live yet in all countries. We are working very hard though to setup the necessary processes and resources in each of the countries. This requires a bit of time so please bear with us as we do plan to go live in Germany at one point.

In the meantime of course feel free to use the english forum (using english language

Kindest regards,

Nico

Communication issue between PRS 650 and Calibre

schneidermic — Thu, 25 Nov 2010 21:11:20 GMT

Hi Nico,

I'll do my very best :smileygrin:

Kind regards,

Michael

Communication issue between PRS 650 and Calibre

SteveF48 — Fri, 03 Dec 2010 16:34:11 GMT

Have you tried installing the latest version from the Calibre website?