Hello
Perhaps someone can help.
I have the above Sony TV. I am running signals from Sky Q box to this tv.
The problem i will describe also occurs when using a Samsung Blu Ray as the source.
Im running the Sky q box to a tv to an office at the top of the house (Samsung) and also more locally to the kitchen. (LG)
I have a constantly occuring hdmi handshake problem with the other 2 tvs when the Sony is in standby.
The signal will drop entirely sometimes 3 or 4times an hour.
I have just bought a Yamaha receiver as i believed my Denon AVR1610 was at fault.This problem will manifest even if i run signals directly without going through the amp. I am using a USBNOVEL 4 Way HDMI Splitter i can also get the same problem with a Neet 2 way splitter.
I placed the small LG tv in the same place in the system as the Sony and TV upstairs and i was absolutely stable.
I have been through all HDMI handshake options, disabled apps etc etc. Update guide off. youview disabled. Sony Select /Shelf etc.
Disabled wifi/disconnected LAN.
Running 6.01 software.
It is only when the TV power cable is removed or disconnected from the splitter that 2 other TVs regains a stable signal and are 100% rock solid.
Can anyone suggest why this TV is messing up my system. Its not a matter of cable runs, cable quality, or other kit, as i have tested everything to exhaustion.
As soon as this TV is introduced to the set up and left in standby via the green remote button.
I have read about similar problems when people are using audio kit through a connected receiver. But not seen anyone have this issue with TV signals.
Having been through all the permutations i have narrowed the problem down without a shadow of doubt to this *&&^*** TV.
I have spent about 2 weeks of my life in total so far on this problem.
Last sony product ever.
Thankyou for any advice.
[profanity removed by moderator]
