cancel
Showing results for 
Search instead for 
Did you mean: 

Join now - be part of our community!

HDR-PJ30 VE "E:91:01"

SOLVED
profile.country.pt_PT.title
TiagoHDR-PJ30
Visitor

HDR-PJ30 VE "E:91:01"

Boa noite a todos
Tenho uma Sony HDR-PJ30 VE à cerca de um ano e à algum tempo que este erro me aparece em lugar da informaçao da bateria
gostaria imenso de saber mais sobre este erro antes do fim da garantia

Se alguem me podesse ajudar agradecia imenso :

Message was edited by: TiagoHDR-PJ30

1 ACCEPTED SOLUTION

Accepted Solutions
profile.country.pt_PT.title
V57...
Contributor

Caro Tiago,

Bem-vindo ao forum da Sony...

Desligue a fonte de alimentação, ligue-a novamente após cerca de 1 minuto e volte a ligá-la...se não resolver o problema, carregue em RESET utilizando um objecto pontiagudo e ligue a câmara de vídeo.

Se carregar em RESET, todas as definições, incluindo a definição do relógio, voltam às predefinições.

Cumprimentos

View solution in original post

3 REPLIES 3
profile.country.pt_PT.title
V57...
Contributor

Caro Tiago,

Bem-vindo ao forum da Sony...

Desligue a fonte de alimentação, ligue-a novamente após cerca de 1 minuto e volte a ligá-la...se não resolver o problema, carregue em RESET utilizando um objecto pontiagudo e ligue a câmara de vídeo.

Se carregar em RESET, todas as definições, incluindo a definição do relógio, voltam às predefinições.

Cumprimentos

profile.country.pt_PT.title
TiagoHDR-PJ30
Visitor

Obrigado pela ajuda mas infelizmente a mensagem de erro continua :slight_frown:

Pelo que já li por cá, nao existe a possibilidade do erro ser derivado à bateria ou ao flash?

Obrigado mais uma vez

cumprimentos

Message was edited by: TiagoHDR-PJ30

profile.country.pt_PT.title
V57...
Contributor

Caro Tiago,

Pode ser da bateria ou do flash...

Veja se isto pode ajudar...(em inglês)...

"I had the same problem and I used a combination of my own and a little help from SONY site.

1. Turn OFF cam
2. Remove the battery or the power supply
3. Turn the switch to CAMERA for about 30 sec
4. Turn the switch to OFF
5. Install the battery or power supply
6. Turn the switch to MEMORY
7. Open the LCD cover and press the RESET button ( small inner button )
8. You will be prompt to adjust date/time. Do it
9. Take some pictures"

Cumprimentos